GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] What happens inside a motor run too lean!
[GMCnet] What happens inside a motor run too lean! [message #337285] Wed, 26 September 2018 21:25 Go to next message
powwerjon is currently offline  powwerjon   United States
Messages: 849
Registered: March 2013
Karma: -2
Senior Member
Several weeks ago there was a discussion on leaning the motor down or run lean burn. Earlier tonight I was going thru several fiber pacs sorting parts and found a piston out of our 1985 alcohol funny car. The motor was a 540 cu.in. with a 12/71 blower and was mostly Keith Black parts. Back in the day and mostly today there are no electronics allowed on the alcohol funny cars. Most of the cars of the day had what was called a “go fast" button that would lean the motor in the top end just before the lights and give it a boost in power. Most of the time you didn’t damage the motor, but sometime when you already had the motor on Kill and it was the final round you would push the button and you let the smoke out of the motor. The satisfaction was that we did win the round and the race.

There are 6 pictures of one of the pistons that came out of the motor on that run. Notice that the intake pocket is melted and pushed in with a hole in the top of the piston. The ring land is gone on that side and on the exhaust side too is scuffed badly and the skirts are scuffed too. Needless to say the sleeve was in poor shape too! This is also was can happen in our motors too.

http://www.gmcmhphotos.com/photos/general-pictures/p65263-img-14881.html
http://www.gmcmhphotos.com/photos/general-pictures/p65262-img-14871.html
http://www.gmcmhphotos.com/photos/general-pictures/p65261-img-14861.html
http://www.gmcmhphotos.com/photos/general-pictures/p65260-img-14851.html
http://www.gmcmhphotos.com/photos/general-pictures/p65259-img-14841.html
http://www.gmcmhphotos.com/photos/general-pictures/p65258-img-1483.html

J.R. Wright
GMC Great Laker MHC
GMCGL Tech Editor
GMC Eastern States Charter Member
GMCMI
78 GMC Buskirk 30’ Stretch
75 GMC Avion (Under Reconstruction)
Michigan
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Re: [GMCnet] What happens inside a motor run too lean! [message #337292 is a reply to message #337285] Thu, 27 September 2018 09:39 Go to previous messageGo to next message
Carl S. is currently offline  Carl S.   United States
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
Senior Member

Here are a couple of photos of pistons that came out of Dave Wood's 403:

http://www.gmcmhphotos.com/photos/g7162-david-wood-27s-403.html

It had a heater hose come in contact with the AC belt on the way to the Tucson GMCMI last Spring and was severely overheated besides running lean due to the mysterious vacuum leaking device that had been installed in the PCV line.


Carl Stouffer '75 ex Palm Beach Tucson, AZ. Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
Re: [GMCnet] What happens inside a motor run too lean! [message #337296 is a reply to message #337292] Thu, 27 September 2018 11:04 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
Think in terms of an oxy/acetelyne cutting torch. Nothing too much exciting
happens when you heat parts with the preheat flames, but "Ohhh Mama" when
you push on the oxygen lever, bad stuff happens quick. Rapid oxidation
occurs within nano seconds when excessive oxygen is present.
Parts can, and do, glow red hot in the absence of oxygen, like exhaust
valves in a running engine, turbocharger wheels and cases, exhaust
manifolds and headers, etc. and no harm comes to them short term. BUT, add
too much oxygen to the exhaust gas stream and look out, bad stuff happens
in the form of damaged pistons, exhaust valves, turbo wheels, uncontrolled
combustion processes which results in detonation, overheating, cracked
castings, broken crankshafts etc. Quicker than you can describe it.
Jim Hupy
Salem, Or
78 GMC ROYALE 403

On Thu, Sep 27, 2018 at 7:40 AM Carl Stouffer wrote:

> Here are a couple of photos of pistons that came out of Dave Wood's 403:
>
> http://www.gmcmhphotos.com/photos/g7162-david-wood-27s-403.html
>
> It had a heater hose come in contact with the AC belt on the way to the
> Tucson GMCMI last Spring and was severely overheated besides running lean
> due
> to the mysterious vacuum leaking device that had been installed in the PCV
> line.
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: [GMCnet] What happens inside a motor run too lean! [message #337319 is a reply to message #337296] Fri, 28 September 2018 08:56 Go to previous message
Keith V is currently offline  Keith V   United States
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
Senior Member
OK so what is 'too lean' 16:1? 15:1? 14:1?
________________________________
From: Gmclist on behalf of James Hupy
Sent: Thursday, September 27, 2018 11:04 AM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] What happens inside a motor run too lean!

Think in terms of an oxy/acetelyne cutting torch. Nothing too much exciting
happens when you heat parts with the preheat flames, but "Ohhh Mama" when
you push on the oxygen lever, bad stuff happens quick. Rapid oxidation
occurs within nano seconds when excessive oxygen is present.
Parts can, and do, glow red hot in the absence of oxygen, like exhaust
valves in a running engine, turbocharger wheels and cases, exhaust
manifolds and headers, etc. and no harm comes to them short term. BUT, add
too much oxygen to the exhaust gas stream and look out, bad stuff happens
in the form of damaged pistons, exhaust valves, turbo wheels, uncontrolled
combustion processes which results in detonation, overheating, cracked
castings, broken crankshafts etc. Quicker than you can describe it.
Jim Hupy
Salem, Or
78 GMC ROYALE 403

On Thu, Sep 27, 2018 at 7:40 AM Carl Stouffer wrote:

> Here are a couple of photos of pistons that came out of Dave Wood's 403:
>
> http://www.gmcmhphotos.com/photos/g7162-david-wood-27s-403.html
>
> It had a heater hose come in contact with the AC belt on the way to the
> Tucson GMCMI last Spring and was severely overheated besides running lean
> due
> to the mysterious vacuum leaking device that had been installed in the PCV
> line.
> --
> Carl Stouffer
> '75 ex Palm Beach
> Tucson, AZ.
> Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive,
> Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American
> Eagles,
> Solar battery charging. GMCSJ and GMCMI member
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org



Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
Previous Topic: GMC Items For Sale
Next Topic: Converter question
Goto Forum:
  


Current Time: Mon Apr 29 03:42:12 CDT 2024

Total time taken to generate the page: 0.02447 seconds